⚠ī¸Common bugs & fixes

In any case where our new bypass causes a PC crash or failure within a users PC, there are some simple steps which will fix it nearly every time. *The steps listed here require the user have a USB to enter into windows recovery mode, however once issues are solved it should be very rare for this to happen and we will compensate these users personally once their issues are resolved

  1. Get/Find a USB > 8gb in Size

  2. (On a seperate PC with the USB plugged in) Install the media creation tool from microsoft "https://www.microsoft.com/en-us/software-download/windows10"

  3. On the sepearate PC please run the downloaded program "MediaCreationTool_XXHX.exe" and let it setup

  4. Accept microsofts terms and conditions and choose from the two next options to "Create an Installation Media..." and press Next

  5. Verify its creating the installation media onto the USB drive letter you have plugged in (if its the only USB it will automatically select it)

  6. Wait for this process to fully complete

  7. Once fully completed successfully, please now plug this USB into the affected / not functioning machine

  8. Have the user enter their bios and boot to this USB drive (same steps for re-installing windows)

  9. Once booted it will ask to select a language and a few other basic options to-do with setup

  10. After selecting these options please instead of pressing next again look to the bottom left of the page where it says "Repair this PC"

  11. Once in the windows "recovery" screen select "Troubleshoot" and "Advanced" from their you will see the option to open up a console (this is what we want)

  12. Once the user is within the consol where they can enter windows commands, the hard part is over.. carefully run the following commands.

List of Repair Commands (Each number is a different command to run individually!)

  1. mountvol Z: /s

  2. xcopy Z:\EFI\Boot\bootx64.bak Z:\EFI\Boot\bootx64.efi ^ The above command will *likely ask the user if they want to override... press Y on their keyboard to allow this

  3. xcopy Z:\EFI\Microsoft\Boot\bootmgfw.bak Z:\EFI\Microsoft\Boot\bootmgfw.efi ^ The above command will *likely ask the user if they want to override... press Y on their keyboard to allow this

  4. bootrec /FixMbr

  5. bootrec /FixBoot

  6. bcdboot c:\windows /s Z: /f UEFI

Once finished, unplug the USB and restore the boot order to boot into windows it should work flawlessly

Format: (Error Message) : (Error Code) : (Error Reason) : (Suggested Solution)

Misc. Reason Key:

  1. *Unknown Error Reasons = This should never fail... and its likely due to the users PC (Anti-Virus, Anti-Cheat, ect.)

  2. *Removed Error Reasons = This has a reason we cannot explain to the general public, the suggested solution will almost always be to refer to a dev

Info: This list purely contains the information about unidentifiable errors, some errors won't be in this list, because they are self-explainable (Or possibly the list needs to be updated)

Error Key: ? = Identifying Code Inserted Here (Share with dev upon possible contact) ERRORCODE = Windows Error Code Inserted Here (Share with dev upon possible contact)

Bootstrap Failure

(Bootstrap Failure) : (Invalid Processed Data 0x?) : (Failed to Contact Our Loaders Build Server) : (Servers may be Offline, or Users ISP is Blocking Connection)

(Bootstrap Failure) : (Failed to Open Client) : (*Unknown) : (Contact Dev)

(Bootstrap Failure) : (Failed to Cleanup Internet Data) : (*Unknown) : (Process Might be Limited by Anti-Virus)

(Bootstrap Failure) : (Failed to Query Process) : (Failed to Query Required Permissions to Loader Process) : (Process Might be Limited by Anti-Virus)

(Bootstrap Failure) : (Failed to Query Startup Info) : (*Unknown) : (Process Might be Limited by Anti-Virus or Contact Dev)

(Bootstrap Failure) : (Failed to Map Startup Info) : (*Unknown) : (Process Might be Limited by Anti-Virus or Contact Dev)

(Bootstrap Failure) : (Failed to Query Execution) : (*Unknown) : (Process Might be Limited by Anti-Virus or Contact Dev)

(Bootstrap Failure) : (Image Crash Detected! ErrorID: ERRORCODE) : (*Unknown) : (Contact Dev)

(Bootstrap Failure) : (Failed to Cleanup Image!) : (*Unknown) : (Contact Dev)

Initialization Failure

(Initialization Failure) : (0x0) : (*Removed) : (Contact Dev)

(Initialization Failure) : (0x1 : 0x0) : (*Unknown) : (User Process Might be Limited by Anti-Virus???)

(Initialization Failure) : (0x1 : 0x1) : (*Unknown) : (User Process Might be Limited by Anti-Virus???)

(BCode) : (0x5) : (SQL Server is Offline) : (Server is Offline, Likely Under Maintanence)

Overlay Failure

(Overlay Failure) : (0x0) : (Couldn't Create D3D Device) : (Missing DirectX Runtimes Likely / Runtimes Need to be Updated / DirectX Version Unsupported)

(Overlay Failure) : (0x1) : (Couldn't Create or Update Window) : (Contact Dev)

(Overlay Failure) : (0x3) : (Window / Window Handle Invalid or Closed) : (Potentially Re-Install DirectX or Contact Dev)

Injection Failure

(Injection Failure) : (0x0) : (Product Injection Data Missing) : (Product Data Corrupted / Product DLL isn't Uploaded / Product DLL hasn't been Processed)

(Injection Failure) : (0x1) : (*Removed) : (Contact Dev)

(Injection Failure) : (0x2) : (*Removed) : (Refund / PC Update Required due to highly specific versions of windows!)

(Injection Failure) : (0x3) : (*Removed) : (Contact Dev) (Injection Failure) : (0x4) : (*Removed) : (Coulden't Upload Files, Contact Dev)

(Injection Failure) : (0x5) : (*Removed) : (Contact Dev)

(Injection Failure) : (0x6 : 0x0) : (*Removed) : (Contact Dev)

(Injection Failure) : (0x6 : 0x1) : (*Removed) : (Contact Dev)

(Injection Failure) : (0x6 : 0x2) : (*Removed) : (Disable Anti-Virus / Disable Windows UAC)

(Injection Failure) : (0x6 : 0x3 : ERRORCODE) : (*Removed) : (Simple to Resolve, Contact Developer)

(Injection Failure) : (0x6 : 0x4 : ERRORCODE) : (*Removed) : (Simple to Resolve, Contact Developer)

(Injection Failure) : (0x6 : 0x5 : ERRORCODE) : (*Removed) : (Simple to Resolve, Contact Developer

(Injection Failure) : (0x7 : 0x0) : (Couldn't Locate Important System Files) : (Disable Anti-Virus, and if that doesn't work... Contact Dev)

(Injection Failure) : (0x7 : 0x1) : (*Removed) : (Disable Anti-Virus / Disable Runtime Anti-Cheats (Facit, ESEA))

(Injection Failure) : (0x7 : 0x2) : (*Removed) : (Contact Dev with users log-file "C:\Users\Public\Loader.log")

(Injection Failure) : (0x8) : (*Unknown) : (Update Windows Version and Disable Anti-Virus)

(Injection Failure) : (0x9 : 0x1) : (*Unknown) : (Disable Anti-Virus or Contact Dev)

(Injection Failure) : (0x9 : 0x2) : (*Unknown) : (Contact Dev)

(Injection Failure) : (0x9 : 0x3) : (*Unknown) : (Contact Dev)

(Injection Failure) : (0x9 : 0x4) : (Invalid Protected File Data) : (Contact Dev)

(Injection Failure) : (0x9 : 0x5) : (Invalid Product File Data) : (Contact Dev)

(Injection Failure) : (0x9 : 0x6) : (Failed to Mount UEFI Drive) : (Insturct User to Switch Boot Mode from Legacy to UEFI or in Other Cases Spoof Post-Injection)

(Injection Failure) : (0x9 : 0x7) : (Failed to Access Required Files) : (Disable Anti-Virus or Contact Dev)

(Injection Failure) : (0x9 : 0x8) : (Failed to Access Required Windows Files) : (Disable Anti-Virus & Windows UAC or Contact Dev)

(Injection Failure) : (0x9 : 0x9) : (*Unknown) : (Disable Anti-Virus or Contact Dev)

(Injection Failure) : (0x10) : (*Unknown) : (Disable All Anti-Virus or Contact Dev)

(Injection Failure) : (0x11 : ? : ?) : (*Unknown) : (Disable All Anti-Virus (If that does not work, contact dev))

(Injection Failure) : (0x12) : (Missing Library or Binaries) : (Verify All Runtimes DirectX & VisualC++ are Up-To-Date or Contact Dev)

(Injection Failure) : (0x13) : (Missing Library Information) : (Verify All Runtimes DirectX & VisualC++ are Up-To-Date or Contact Dev)

(Injection Failure) : (0x14) : (Corrupt Build Server Data / Build Server Offline) : (Contact Dev)

(Injection Failure) : (0x15) : (Corrupt Product File Information) : (Contact Dev)

Last updated